Programming
32 AC-x32 Series Installation and Programming Manual
5.9.5 Enrolling Secondary Codes Using the Code
Search Method
The Code Search feature enables you to quickly enroll a Secondary
Code to a user who already has a Primary Code.
To enroll secondary codes using the Code Search method:
1. Enter Programming mode.
2. Press 7 to enter Menu 7.
The Mode LED turns orange.
3. Enter the 3-digit User Slot number 000.
The Door LED flashes orange.
The controller is now waiting for the Primary Code of the user to
whom you want to add a Secondary Code.
4. Present a proximity card or enter the 4-digit PIN code of the
Primary code belonging to the user for whom you want to add a
Secondary code.
5. The Mode LED flashes red.
If the Primary code entered is not valid, a long beep is emitted
and the unit continues to wait for a valid Primary code.
6. Present a proximity card or enter the 4-digit PIN code to be used
as the Secondary code.
If the Secondary Code is valid, the controller beeps three times
and returns to Normal mode.
If the Secondary Code is invalid, the controller emits a long beep,
and continues to wait for you to enter a valid Secondary code.
To Next Page
Loading...
Need help?
General
