Rosslare AC Series User Manual

Programming
30 AC-x32 Series Installation and Programming Manual
5.9.2 Secondary Codes
 Secondary codes can only be enrolled to a user slot that already
has a Primary Code enrolled, but no Secondary code.
 Secondary Codes do not have to be unique, meaning that
multiple users can all hold the same Secondary code.
 Secondary codes cannot be the same as any system codes, such
as the Normal/Secure code or Open code.
 Users who hold Secondary codes can gain entry in any mode of
operation.
5.9.3 Enrolling Primary and Secondary Codes
There are two methods to enroll Primary and Secondary codes:
 Standard Method
Mainly used when the user slot number for the user that you
want to program is known. You can program both Primary and
Secondary codes using the Standard method (see Section 5.9.4).
 Code Search Method
Mainly used when enrolling a user's Secondary code and the User
slot code is unknown. The Code Search method only works if a
user’s Primary code is already enrolled but the Secondary code is
not (see Section 5.9.5).
5.9.4 Enrolling Primary and Secondary Codes Using
the Standard Method
To enroll primary and secondary codes using the Standard
method:
1. Enter Programming mode.
2. Press 7 to enter Menu 7.
The Mode LED turns orange.
Mode
Door
Green
Mode
Door
Orange

Rosslare AC Series Specifications

General

Operating Voltage	12VDC
Input Voltage	12VDC
Communication	RS-485, TCP/IP
Output Voltage	12V DC
Enclosure Rating	IP65
Type	Access Control Unit