Rosslare AC Series User Manual

Introduction
8 AC-x32 Series Installation and Programming Manual
1. Introduction
The AC-x32 is a series of indoor standalone controllers. The units
accept up to 500 users and allow entry via a personal identification
number (PIN) or by presenting a proximity card.
1.1 Reader/Controller Types
The six types of units described in this manual are:
Keypad Type PIN Proximity
AC-B32
3X4 Standard  
AC-C32
2X6 Mullion  
AC-D32
3X4 Standard  
1.2 Equipment
The following equipment is provided in every AC-x32 package:
 AC- x32 controller
 Installation kit
 1 drilling template (label/sticker)
 1 security spline key
 1 security hex screw
 4 mounting screws and wall plugs
 Installation and operating instructions

Rosslare AC Series Specifications

General

Operating Voltage	12VDC
Input Voltage	12VDC
Communication	RS-485, TCP/IP
Output Voltage	12V DC
Enclosure Rating	IP65
Type	Access Control Unit