Rosslare AC-115 User Manual

AC-115
Compact Networked Single Door Controller
Installation and User Manual
December 2007

Rosslare AC-115 Specifications

General

Brand	Rosslare
Model	AC-115
Category	Controller
Language	English

Summary

Introduction

1.2 Technical Specifications

Details the electrical, environmental, and mechanical characteristics of the controller.

Installation

2.1 Mounting the Controller

Provides step-by-step instructions for physically installing the AC-115 controller unit.

2.2 Power Wiring

Explains the procedures for correctly connecting the power supply to the controller.

2.3 Typical Lock and Option Wiring

Illustrates wiring diagrams for common lock mechanisms and auxiliary options.

2.4 Reader Wiring

Details how to connect external card readers to the controller.

2.5 Connecting a controller to a PC

2.6 Connecting a system to a PC

Features and Concepts

3.2 Modes of Operation

3.3 Changing the Modes of Operation

Programming Instructions

4.1 Programming Menu Quick Reference Guide

4.2 Entering Programming Mode

Step-by-step guide on how to access the controller's programming interface.

4.3 Exiting Programming Mode

4.4 Return to Factory Default Settings

Details how to reset the controller to its original factory configurations.

4.5 Deleting all Employee Codes

4.6 Adding an Employee Code

Guides on how to add new employee access codes and credentials.

4.7 Lock Strike Relay and Auxiliary Relay Code Assignment

4.8 Deleting an Employee Code

4.9 Resetting all Special Codes to Factory Default Settings

Resets security and access codes to default values.

4.10 Changing the Programming Code

Procedure for modifying the master programming code.

4.11 Changing the Normal / Secure Code

4.12 Changing the Duress Code

4.15 Changing the Normal / Bypass Code

4.16 Resetting all Timed Events and Output Settings to Factory Default Settings

4.17 Setting up the Lock Strike Release Time and Output Settings

Configures the duration the lock strike remains active.

4.18 Setting up the Door Ajar Time

4.19 Setting up the Forced Door Time

4.21 Setting up the Auxiliary Release Time and Output Settings

4.22 Resetting all Event Actions to Factory Default Settings

4.23 Setting up the Door Ajar Event Actions

4.24 Setting up the Forced Door Event Actions

4.25 Setting up the Tamper Event Actions

4.26 Setting up the Duress Event Actions

4.27 Setting up the Release to Exit (REX) Event Actions

4.33 Replacing a lost Programming Code

Procedure to recover or reset the programming code.

4.34 Replacing a lost Normal / Secure Code

Procedure to recover or reset the normal/secure code.

Appendix A. Replacing the Battery