Need help?Do you have a question about the Rosslare AC-225? AC-225IP? AC-225U and is the answer not in the manual?
General| Brand | Rosslare |
|---|---|
| Model | AC-225? AC-225IP? AC-225U |
| Category | Controller |
| Language | English |
Details the electrical parameters of the AC-225, including operating voltage, input current, and input/output specifications.
Details the power supply requirements, including input, output voltages, and backup battery charger specifications.
Illustrates the wiring procedures for non-supervised inputs on the AC-225 access control panel.
Explains how to wire supervised inputs for the AC-225, including the use of resistors.
Demonstrates wiring for door lock mechanisms, detailing both fail-safe and fail-secure configurations.
Shows the wiring diagram between the PS-14 power supply and the AC-225, including backup battery connection.
Details the four types of input configurations for the AC-225: Normally Open, Normally Closed, and their supervised variants.
Explains how DIP switches on the AC-225 control vital parameters like device address and baud rates.
Details how DIP switches 1 and 2 set the communication speed for serial connections to a PC.
Explains the use of DIP switches 4-8 to set the panel's unique network address within the VeriTrax system.
To Next Page