EasyManua.ls Logo

Rosslare AC-F43 - User Manual

Rosslare AC-F43
71 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
AC-F/G4x Series
Outdoor Backlit
Standalone Controllers
Installation and Programming
Manual
Models:
AC-F43
AC-F44
AC-G43
AC-G44

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Rosslare AC-F43 and is the answer not in the manual?

Rosslare AC-F43 Specifications

General IconGeneral
ModelAC-F43
Input Voltage12 VDC
Number of Doors Supported1
Operating Voltage12 VDC
Card TechnologyRFID
Dimensions120mm x 80mm x 25mm
Read RangeUp to 2.36 in (6 cm)

Summary

Introduction to AC-FG4 x Series Controllers

Controller Types

Details the differences between AC-F43, AC-F44, AC-G43, and AC-G44 models.

Box Content

Lists all items included in the product packaging for installation.

Ancillary Equipment

Identifies optional and required external devices needed for installation.

Technical Specifications

Installation Procedures

Mounting Procedures

Step-by-step guide for physically installing the controller unit on various surfaces.

Wiring Guide

Explains the color-coded wiring connections for power and external devices.

Controller Operation

Modes of Operation

Describes the Normal, Secure, and Bypass operating modes of the controller.

User Levels and Access

Explains the different user levels (Normal, Secure, Master) and their access privileges.

Switching Operational Modes

Details the procedures for changing between Normal, Secure, and Bypass modes.

Auxiliary Input, Output, and REX Function

Covers the functionality of auxiliary inputs/outputs and the Request to Exit button.

Tamper and Lockout Features

Explains the tamper detection and lockout mechanisms for security.

BL-D40 External Sounder Integration

Describes the integration and functions of the optional BL-D40 external sounder.

Programming the Controller

Programming Mode Access

Instructions for entering and exiting the controller's programming mode.

Code Management

Procedures for changing Open, Auxiliary, Programming, and Normal/Secure/Bypass codes.

System Configuration Settings

Covers setting Fail Safe/Secure, Auxiliary Modes, Lockout, and Backlight behavior.

User and Relay Management

Guides on enrolling, deleting codes, and assigning relay functions to users.

PIN and Code Replacement

Details on changing PIN code length and replacing programming/normal codes.

Declaration of Conformity

Limited Warranty Information

Related product manuals