Rosslare AC-F43 - 5.14.2 Relay Code Assignment Using Search Method

Programming
62 AC-F/G4x Series Installation and Programming Manual
5.
Do one of the following:
 Press # to move to the next available user slot number.
 Enter another 3-digit user slot number.
If you do not wish to continue enrolling codes, press #
twice
and the controller returns to Normal mode.
5.14.2 Relay Code Assignment using Search Method
To assign the relay code using Search method:
1.
Enter Programming mode.
2.
Press 9 to enter Menu 9.
The left LED turns green and the right LED
turns orange.
3.
Enter 000 for user slot access.
The right LED flashes orange.
Green
Orange
Green
Orange
9
Green