EasyManua.ls Logo

Rosslare AC-225? AC-225IP? AC-225U - Inputs Description

Rosslare AC-225? AC-225IP? AC-225U
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Input and Output Requirements
Open circuit (Infinite loop resistance) or short circuit (0
resistance) across input terminals - Trouble State.
Figure 13: Normally Closed Supervised Input (Double Resistor)
4.2 Inputs Description
Request to Exit Button (REX) Input
Use the REX Input to open a door directly. The following should
be defined:
Single door controller: Door 1 – IN 1
Double door controller: Door 1 – IN 1
Door 2 – IN 2
Typically, the REX input is connected to a Normally Open push
button that is located inside the premises. The push button is
generally located in an easy-to-access position and opens a
door without reading a proximity card or PIN code.
AC-225 Hardware Installation and User Guide Page 22

Related product manuals