Introduction
Page 5 AC-115 Hardware Installation and User's Guide
1. Introduction
The AC-115 is an advanced single door controller, of which up
to 8 units can be connected together along with a PC to form
an 8-door, PC programmable network.
The AC-115 has been designed to be highly flexible, allowing it
to be used in multiple applications. The controller is feature
rich, and provides the user valuable control over the door(s) it
is attached to.
When using the AC-115 as a standalone controller, it can be
programmed using its own built in programming keypad or by
using the AC-115 PC Software.
When using the AC-115 in a multi-controller network, the
network of controllers can only be programmed using the AC-
115 PC software.
Note:
The AC-115 has been tested by UL as a standalone
system only. Connecting the AC-115 in a multi-
controller network application was not verified by UL.
In this manual, you will learn how to easily install and program
the AC-115 using the controller’s built-in programming keypad.
Programming the AC-115 with a PC is even easier and unlocks
features that aren’t accessible from the controller’s
programming keypad. Programming the AC-115 with a PC is
covered in the provided Software Installation and User’s Guide.
It is recommended that the Hardware Manual be read first
before the Software Manual, as key concepts are introduced
in the Hardware Manual that are not covered in the Software
Manual.
The topics in this chapter are:
• Key Features
• Technical Specifications
To Next Page
Loading...
Need help?
General
