Rosslare AC-115 User Manual

Programming Instructions
AC-115 Hardware Installation and User's Guide Page 38
? ? ? ? ? ?
and the controller will exit Programming Mode and return
to Normal Mode.
• The Mode LED will turn green
Note:
An Auxiliary time 0:00 will set the Auxiliary Output to toggle
mode.
4.22 Resetting all Event Actions to Factory Default
Settings
1. Enter Programming Mode
• Mode LED will turn orange
2. Press ”40” to enter Menu 40
• The Mode LED will turn red
• The Door LED will flash red
3. Enter the Programming Code for
confirmation.
If your Programming Code is less than 6-digits long, do not
forget to press the “#” key to confirm your entry after
entering your Programming Code.
4. If the programming code is entered correctly, the Event
Actions settings will reset to factory default settings. The
controller will exit Programming Mode and enter Normal
Mode.
• You will hear a short beep
• The Mode LED will turn green
• The Door LED will stop flashing
If the Programming Code is entered incorrectly, the Event
Actions settings will NOT reset to factory default settings.
The controller will exit Programming Mode and enter
Normal Mode.
• You will hear a long beep
• The Mode LED will turn green
• The Door LED will stop flashing
Mode
Door
Green
Mode
Door
Oran
g
e
4 0
Mode
Door
Red
Red
Mode
Door
Green
Mode Door
Green

Rosslare AC-115 Specifications

General

Brand	Rosslare
Model	AC-115
Category	Controller
Language	English