Rosslare AC Series User Manual

Programming
AC-x32 Series Installation and Programming Manual 29
2. Construct the 4-digit code using the
following instructions:
 First Digit
For Fail Secure Operation, the first digit should be 0.
For Fail Safe Operation the first digit should be 1.
 Second Digit
Siren time in minutes (1-9, 0-disabled)
 Third and Fourth Digits
Enter the number of seconds (from 1 to 99) that you want
the Lock Strike to be released.
For example, 0512 means a Fail Secure Operation consisting
of a 5-minute siren and a 12-second Lock Strike release time.
Three beeps are emitted.
The system returns to Normal mode.
5.9 Enrolling Primary and Secondary Codes
5.9.1 Primary Codes
 Primary Codes can only be enrolled to an empty user slot,
meaning a slot where there is no existing Primary code.
 Primary Codes must be unique, meaning that one user's Primary
Code cannot be the same as another user's Primary code.
 Primary codes cannot be the same as any system codes, such as
the Normal/Secure code or Open code.
 Users who hold a Primary code can gain entry only during Normal
mode.
Mode
Door
Green

Rosslare AC Series Specifications

General

Operating Voltage	12VDC
Input Voltage	12VDC
Communication	RS-485, TCP/IP
Output Voltage	12V DC
Enclosure Rating	IP65
Type	Access Control Unit