Need help?Do you have a question about the Rosslare AC-215 and is the answer not in the manual?
Overview of the AC-215 access control unit's capabilities and functionalities.
Details on the AxTrax™ AS-525 PC software used with the AC-215 system.
Details on voltage, current, and power requirements for the AC-215 unit.
Operating temperature and humidity ranges for the AC-215 unit.
Physical dimensions and weight of the AC-215 unit.
Description of various input types and their connections for the AC-215.
Description of various output types and their connections for the AC-215.
Setting the serial communication baud rate for the AC-215 unit.
Defining the AC-215 as a single or double door controller via DIP switch.
Setting the unique address for the AC-215 unit on the network.
Details on RS-232 and RS-485 serial communication setup.
Using a modem for remote AC-215 communication.
Connecting the AC-215 to a Local Area Network via TCP/IP.
Diagrams and instructions for wiring various inputs to the AC-215.
Diagrams and instructions for wiring outputs from the AC-215.
How to connect the AC-215 to its power supply and backup battery.
Schematic view of the AC-215 control panel's PCB and connectors.
Wiring connections and cable color coding for proximity and keypad readers.
List of necessary hardware for connecting MD-N32 and AC-215.
Important considerations before starting MD-N32/AC-215 setup.
How to connect the PC to the network for MD-N32 setup.
Wiring the AC-215 panel to the MD-N32 and other components.
Steps for configuring the MD-N32 unit with AxTrax™ AS-525 software.
List of hardware needed for MD-N33 and AC-215 connectivity.
Key points to consider before setting up modem connections.
Connecting the PC and modem to the MD-N33 unit.
Wiring the AC-215 panel to the MD-N33 and MD-14 converters.
Configuring the MD-N33 unit with AxTrax™ AS-525 software.
Setting up the PC modem for communication with the AC-215.
Configuring the remote modem for AC-215 communication.
Checking the status of remote modem connections.
Procedure to restore the AC-215 to its factory default settings.
To Next Page
General
