Rosslare AC-215 - Technical Specifications; Electrical Specifications; Environmental Specifications; Mechanical Specifications

Technical Specifications
AC-215 Installation Manual 13
2. Technical Specifications
This chapter discusses the technical specification required for the system.
2.1 Electrical Specifications
2.1.1 Main Unit
Operating Voltage
12 VDC 0.5A
From PS-14
Maximum Input Current
(not including attached devices)
Standby: 125 mA
Maximum: 325 mA
2.1.2 Outputs
Relay Outputs
5 A Relay N.O. and N.C. options
2.1.3 Inputs
General Inputs:
High impedance active low inputs.
Maximum voltage: 5 VDC
Reader's Electrical requirements:
Voltage: 12 VDC
Max Current: 300 mA
2.1.4 Indicators and Annunciators
Visual:
8 on board LEDs
as well as three PS LEDs (power,
Low Battery, output (V) Fail)
Audio:
Built-in sounder (Bell, Chime and Siren)
Speaker's Electrical
Characteristics:
8 Ohm, 250 mW
2.1.5 Environmental Specifications
Operating Temperature:
0°C to 49°C (32°F to 120.2°F)
Operating Humidity:
0 to 85% (non-condensing)
2.1.6 Mechanical Specifications
Enclosure's Dimensions (LxWxD):
264 x 334 x 84.5 mm (10.4 x 13.2 x 3.4 in.)
Weight:
3.77 kg (8.31 lbs)