Connecting between MD-N33 and AC-215
AC-215 Installation Manual 39
B.7 Remote modem – configuration and initialization
1. Click the Remote modem tab to configure the remote modem.
2. In the Settings section:
For most applications, the default initialization string of AS-525 is enough.
The initialization string is displayed in the window.
Adding or editing initialization string is allowed by uncheck "Use default"
and type the AT command in the "Initialization string" window.
3. Set the number of rings before the PC modems will answer.
4. Connect the remote modem to the PC via the selected com port and click
Apply to initialize the PC modem.
5. Click OK for the successful initialization.
If a failure message appeared, check the modem connections and repeat
the last steps.
To Next Page
Loading...
Need help?
General
