Rosslare AC-D32 User Manual

AC-x32 Series
Standalone Access Control Units
Installation and Programming Manual
AC-B32 AC-C32 AC-D32

Rosslare AC-D32 Specifications

General

Model	AC-D32
Operating Voltage	12VDC
Output Voltage	12VDC
Tamper Output	Yes
Communication	RS-485

Summary

2. Technical Specifications

3. Installation

3.1 Mounting

3.2 Wiring Diagrams

4. Operation

4.1 User Levels

4.2 Modes of Operation

4.3 Changing Operational Modes

5. Programming

5.1 Entering Programming Mode

Guides users on how to access the programming mode, including default codes and LED indicators.

5.2 Exiting Programming Mode

Provides instructions on how to exit the programming mode and return to Normal mode.

5.3 Changing Open Code 1

Explains how to change the factory default Open Code 1.

5.4 Changing Open Code 2

Details the procedure for changing the factory default Open Code 2.

5.5 Changing the Programming Code

Guides users on how to modify the system's programming code.

5.6 Changing the Normal/Secure Code

Describes how to change the code used for Normal and Secure modes.

5.7 Changing the Normal/Bypass Code and Door Chime Settings

Explains how to change the Normal/Bypass code and configure door chime settings.

5.8 Setting Operation Parameters

Details how to configure fail-safe/secure operations, tamper siren, and lock strike release times.

5.9 Enrolling User Codes

5.10 Deleting User Codes

5.11 Return to Factory Default Settings

5.12 Lost Code Recovery