Programming
26 AC-x32 Series Installation and Programming Manual
To change the Open Code 2:
1. Enter Programming mode.
2. Press 2 to enter Menu 2.
The Mode LED turns orange.
3. Enter the new 4-digit Open Code 2 code.
Three beeps are emitted.
The system returns to Normal mode.
5.5 Changing the Programming Code
The Programming code cannot be erased; code 0000 is invalid
and does not erase the Programming code.
To change the Programming code:
1. Enter Programming mode.
2. Press 3 to enter Menu 3.
The Mode LED turns green.
3. Enter the new 4-digit Programming
code.
Three beeps are emitted.
The system returns to Normal mode.
To Next Page
Loading...
Need help?
General
