Programming
AC-x32 Series Installation and Programming Manual 25
5.3 Changing Open Code 1
Open Code 1 is mainly used as a method to quickly test the Lock
Strike Relay during installation. The default factory setting for Open
Code 1 is 2580.
When the first user is added to the controller, the default Open Code
1 is automatically deleted, and is ready for a new Open Code 1 to be
re-entered.
Open Code 1 does not function in Secure mode.
Wrong entries return the controller to Normal mode.
Code 0000 erases and deactivates Open Code 1.
To change the Open Code 1:
1. Enter Programming mode.
2. Press 1 to enter Menu 1.
The Mode LED turns red.
3. Enter the new 4-digit Open Code 1 code.
The system returns to Normal mode.
5.4 Changing Open Code 2
Open Code 2 is mainly used as a method to quickly test the Lock
Strike Relay during installation. The default factory setting for Open
Code 2 is 0852.
When the first user is added to the controller, the default Open Code
2 is automatically deleted, and is ready for a new Open Code 2 to be
re-entered.
Open Code 2 does not function in Secure mode.
Wrong entries return the controller to Normal mode.
Code 0000 erases and deactivates the Open code.
To Next Page
Loading...
Need help?
General
