Rosslare AC-G4 Series User Manual

Changing the Open Code
Changing the Auxiliary Code
The Open Code is mainly used as a method to quickly test the
Lock Strike Relay during installation.
The Default Factory Setting for the Open Code is 2580.
When the first user is added to the controller, the default Open
Code will automatically be deleted, ready for a new Open Code
to be re-entered.
1) Enter Programming Mode
2) Press "1" to enter Menu 1
!
The Mode LED will turn red
3) Enter the new 4-digit code you
wish to set as Open Code.
4) System returns to Normal Mode
!
You will hear three beeps
!
The Door LED will turn off
!
The Mode LED will turn green
Note: - Open Code does not function in Secure Mode.
- Wrong entries: you will hear a long beep and the
controller will return to Normal Mode.
- Code 0000 will erase and deactivate the Open Code.
The Auxiliary Code is mainly used as a method to quickly test the
Auxiliary Relay during installation.The Default Factory Setting for
the Auxiliary Code is 0852.
For security reasons when the first user is added to the controller
or the open code is changed, the default Auxiliary Code will
automatically be deleted, ready for a Auxiliary Code to be
assigned.
Page 22
07/04
AC-G43
Mode Door
GREEN
Mode Door
GREEN
RED
?
?
?
?
Mode Door
GREEN
Page 23
07/04
1) Enter Programming Mode
2) Press "2" to enter Menu 2
!
The Mode LED will turn red
3) Enter the new 4-digit code you
wish to set as Auxiliary Code.
4) System returns to Normal Mode
!
You will hear three beeps
!
The Door LED will turn off
!
The Mode LED will turn green
Note: - Auxiliary Code does not work in Secure Mode.
- Auxiliary Code only works when the Auxiliary Mode is 0,
1, 8 or 9.
- Code 0000 will erase and deactivate the Auxiliary
Code.
1) Enter Programming Mode
2) Press "3" to enter Menu 3
!
The Mode LED will turn green.
3) Enter the new 4-digit code you
wish to set as Programming Code
4) System returns to Normal Mode
!
You will hear three beeps
!
The Door LED will turn off
!
The Mode LED will turn green
Note: - Programming Code can not be erased, i.e. the code
0000 is not valid and will not erase the Programming
Code.
Changing the Programming Code
AC-G43
Mode Door
Mode Door
GREEN
GREEN
Mode Door
GREENGREEN
?
?
?
?
Mode Door
GREEN
Mode Door
GREEN
Mode Door
GREEN
?
?
?
?
ORANGE

Rosslare AC-G4 Series Specifications

General

Brand	Rosslare
Model	AC-G4 Series
Category	Keypad
Language	English