Rosslare AC-G4 Series - Changing the NormalSecure Code; Changing the NormalBypass Code

Programming
38 AC-F/G4x Series Installation and Programming Manual
5.6
Changing the Normal/Secure Code
•
When the Auxiliary mode is 1, 2, 3 or 4, the auxiliary input takes
priority over the Normal/Secure code.
•
Code 0000 erases and deactivates the Normal/Secure code.
To change the Normal/Secure code:
1.
Enter Programming mode.
2.
Press 4 to enter Menu 4.
The left LED flashes red.
3.
Enter the new 4-digit Normal/Secure code.
You hear three beeps.
The system returns to Normal mode.
5.7
Changing the Normal/Bypass Code
The Normal/Bypass code is also used to turn the door chime off
and on. Chime only functions with the BL-D40 external sounder.
•
The chime is only heard when the Lock Strike relay is activated
by a valid code entry.
•
Code 0000 erases and deactivates the Normal/Bypass code.
To change the Normal/Bypass code:
1.
Enter Programming mode.
Green
Green
Red
Green
Green