Rosslare AC-G4 Series User Manual

Changing the Normal / Secure Code
Changing the Normal / Bypass Code
and Door Chime Settings
1) Enter Programming Mode
2) Press "4" to enter Menu 4
!
The Mode LED will flash red
3) Enter the new 4-digit code you
wish to set as Normal / Secure Code
4) System returns to Normal Mode
!
You will hear three beeps
!
The Door LED will turn off
!
The Mode LED will turn green
Note: - When the Auxiliary Mode is 1, 2, 3, or 4 the Auxiliary
Input takes priority over the Normal / Secure Code.
The Normal / Bypass Code is also used to turn the Door Chime off
and on. Chime only functions with BL-D40 External Sounder.
1) Enter Programming Mode
2) Press "5" to enter Menu 5
!
The Mode LED will flash orange.
3) Below is a list of the four different ways that the Normal / Bypass
Code and Door Chime can be programmed.
a) Disable Bypass Mode - Disable Door Chime
b) Disable Bypass Mode - Enable Door Chime
c) Enable Bypass Mode - Disable Door Chime
d) Enable Bypass Mode - Enable Door Chime
Page 24
07/04
AC-G43
Mode Door
GREEN
Mode Door
GREEN
RED
?
?
?
?
Mode Door
GREEN
Mode Door
GREEN
Mode Door
GREEN
ORANGE
Page 25
07/04
a) Disable Bypass Code - Disable Door Chime
Enter the 4-digit code 0000
b) Disable Bypass Code - Enable Door Chime
Enter the 4-digit code 0001
c) Enable Bypass Code - Disable Door Chime
Enter any 4-digit code ending with 0
d) Enable Bypass Code - Enable Door Chime
Enter any 4-digit code not ending with 0
4) System returns to Normal Mode
!
You will hear three beeps
!
The Door LED will turn off
!
The Mode LED will turn green
Note: - The chime is only generated when the Lock
Strike Relay is activated due to a valid code entry.
AC-G43
Mode Door
GREEN
0
0
0
1
0
0
0
0
?
?
?
0
?
?
?
0

Rosslare AC-G4 Series Specifications

General

Brand	Rosslare
Model	AC-G4 Series
Category	Keypad
Language	English