Rosslare AC-G4 Series User Manual

Page 38
07/04
Lock Strike and Auxiliary Relay Code Assignment using the
Code Search Method
1) Enter Programming Mode
2) Press "9" to enter Menu 9
!
The Mode LED will turn green
!
The Door LED will turn orange
3) Enter the 3-digit User Slot 000
!
The Door LED will flash orange
The controller is now waiting for the Primary Code of the user
you want to Code Assign
4) Enter the 4-digit PIN Code of the
Primary Code belonging to the
user you want to assign a code to.
!
The Mode LED will flash green
5) Enter the assignment digit for the current User Slot:
"1" assigns the Lock Strike Relay only
"2" assigns the Auxiliary Strike Relay only
"3" assigns the Lock Strike and Auxiliary Relay
If the assignment digit is valid, you will hear three beeps and
then the controller will return to Normal Mode.
If the assignment digit is invalid, you will hear a long beep and
the controller will wait for another assignment digit to be entered.
AC-G43
?
?
?
?
Mode Door
ORANGE
GREEN
Mode Door
GREEN
Mode Door
ORANGE
GREEN
0
0
0
Mode Door
ORANGE
GREEN
Return To Factory Default Settings
Warning:
You must be very careful before using this command!
Doing so will erase the entire memory which includes
all User and Special Codes, and return all codes to
their factory defaut settings.
1) Enter Programming Mode
2) Press "0" to enter Menu 0
!
The Mode LED will flash red
!
The Door LED will flash red
3) Enter your 4-digit Programming
Code.
!
If the Programming Code is valid, all memory will be erased,
you will hear three beeps and the controller will return to
Normal Mode
!
If the Programming Code is invalid you will hear a long beep
and the controller will return to Normal Mode without erasing
the memory of the controller.
Page 39
07/04
AC-G43
Mode Door
GREEN
Mode Door
RED
RED
?
?
?
?

Rosslare AC-G4 Series Specifications

General

Brand	Rosslare
Model	AC-G4 Series
Category	Keypad
Language	English