Rosslare AC-G4 Series User Manual

Page 16
07/04
Changing the Modes of Operation
Changing from Normal Mode to Secure Mode:
The default factory setting for the Normal / Secure Code is 3838
1) Enter the 4-digit Normal / Secure
Code
!
Mode LED will flash red
2) Press the "#" key to confirm
the Mode change.
!
Mode LED is red
Changing from Secure Mode to Normal Mode:
The default factory setting for the Normal / Secure Code 3838
1) Enter the 4-digit Normal / Secure
Code.
!
Mode LED will flash green.
2) Press the "#" key to confirm
the Mode change.
!
Mode LED will turn green.
The Auxiliary Input of the AC-G43 can also be used to switch the
mode of operation from Secure to Normal Mode and vice versa.
Refer to "Setting the Auxiliary Mode" on Page 27.
AC-G43
Mode Door
GREEN
Mode Door
RED
Mode Door
RED
Mode Door
Mode Door
Mode Door
RED
GREEN
GREEN
07/04
Changing from Normal Mode to Bypass Mode:
By default there is no Normal / Bypass Code. The Normal / Bypass
Code must first be programmed to use this function. Refer to page
24 to create / modify the Normal / Bypass Code.
1) Enter the 4 digit Normal / Bypass
Code.
!
Mode LED will flash orange
2) Press the "#" key to confirm
the Mode change.
!
Mode LED will turn orange
Changing from Bypass Mode to Normal Mode:
1) Enter the 4 digit Normal / Bypass
Code.
!
Mode LED will flash green
2) Press the "#" key to confirm
the Mode change.
!
Mode LED will turn green
The AC-G43 auxiliary input and output can be configured in ten
different modes of operation, for optimum usability in different
applications.
For more information, refer to "Setting the Auxiliary Mode" on Page
27.
Auxiliary Input and Output
Page 17
AC-G43
Mode Door
GREEN
Mode Door
Mode Door
ORANGE
Mode Door
GREEN
Mode Door
ORANGE
Mode Door
ORANGE
GREEN

Rosslare AC-G4 Series Specifications

General

Brand	Rosslare
Model	AC-G4 Series
Category	Keypad
Language	English