Functionality
14 AY-x55 Family Installation and Programming Manual
If the Programming code is valid, the
door LED turns green and the unit
enters Programming mode.
• The factory 4-digit Programming code is 1234.
• If a Programming code is not entered within 30 seconds, the unit
returns to Transmit mode
4.2.2 Exiting Programming Mode
To exit Programming mode:
1. Press # to exit the Programming mode
at any time.
You hear a long beep.
The Transmit LED turns red and the Program LED turns off.
This indicates that the unit has returned to Transmit mode.
Wrong entries may reset the reader back to Transmit mode.
While in Programming mode, if no key is pressed for 30 seconds, the
unit exits Programming mode and returns to Transmit mode.
4.2.3 Selecting Keypad Transmission Format
The AY-x55 has eight different keypad transmission formats.
See Section 4.2.3.1 for more information on keypad transmission
formats.
To select the appropriate keypad transmission format:
1. Enter Programming mode.
2. Press 1 to enter Menu 1.
The Transmit LED turns red.
To Next Page
Loading...
Need help?
General