Controller Operation
AYC-F/Gx4 Series Installation and Programming Manual 41
Enter the code 0000 to disable both
Bypass code and the door chime.
Enter the code 0001 to disable the
Bypass code and enable the door chime.
Enter any code ending with 0 to enable
the Bypass code and disable the door
chime.
Enter a code not ending with 0 to e
the Bypass code and enable the door
chime.
You hear three beeps.
The system returns to Normal mode.
5.9.8 Setting Fail Safe/Secure Operation, Tamper Siren
and Lock Strike Release Time
To set the Fail Safe/Secure Operation, Tamper Siren and Lock
Strike Release Time:
1. Enter Programming mode.
2. Press 6 to enter Menu 6.
The left LED flashes green.
To Next Page
Loading...
Need help?
General
