PRELIMINARY CHECKS
Moving the Massage Chair
Connecting to Power
13
Roll the chair on its casters to the desired location.
Incline the backrest to upright position.
Connect this appliance to a 3-wire properly
grounded outlet.
Turn on the power switch located at the back
of power box.
Turn off the power switch and unplug the appliance from the electrical outlet.
Using two people, push down on the backrest and lift up on the front side by
grabbing the moving Holder located to the front bottom of the armrest), roll
the chair on its casters to the desired location(check the sketch for reference).
Do not move the chair when there is user inside.
To carry this product, do not lift by the footrest or armrest, hold the chassis
and steady the backrest(have 4 or more people to carry the product).
The massage chair is heavy, be careful when moving it.
Please contact the dealer if you need help of moving the massage chair.
CAUTION
Please verify that there is no damage to the supply cord before switching
on the massage chair.
Please verify that the main power switch is turned off before connecting
to power.
CAUTION
To Next Page
