PRELIMINARY CHECKS
16
Before Sitting in the Chair
Use the controller to recline the backrest to its lowest position, raise and
extend the footrest to its top position, make sure there is enough clearance
before commissioning.
Ensure the footrest is well assembled before sitting on the massage chair.
Ensure the massage chair is returned to its original position before sitting on it.
If there is any part not in default position, please turn off the massage chair to
allow it to restore.
Return the backrest and footrest back to its default position after
commissioning and turn off the power switch.
To choose the massage program, please check the Instructions of Controller
and Instructions of Display Screen for reference.
Do not take seat while the legrest is lifted.
Do not put excessive load on the legrest to avoid damage.
CAUTION
To Next Page
