EasyManua.ls Logo

rotai A50 - Troubleshooting; Technical Specification

rotai A50
21 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Noise is heard while
in use
This sound is normal and comes
from the air compressor motor
or other mechanical parts
rubbing against the cloth cover
The power cord is not secured
into the socket
Excessive load has been pressed
on the backrest or legrest
The air hose is blocked
The volume is turned to the
lowest
Massage chair is experiencing
too much pressure
Power switch is off
No need to take any
measures
Secure it into a well
functioned electrical
outlet
Turn on the switch
Replace only with a fuse
of same type and rating
Reduce the load and
try again
Straighten the air hose
and clear out the
blockage
Adjust the speaker
volume from the mobile
devices
Slightly lift your back/
backrest
The fuse is blown
Appliance does not
start
Backrest or footrest
can not raise or
recline
Airbag malfunction
No music comes
from the speaker
Massager stops
working while in use
Product name: Shiatsu Master Massage Chair
Model: A50
Rated voltage: 220V~
Rated frequency:50HZ
Rated power: 100W
Safety design: Class I
Thank you for your cooperation.
Important: Do not attempt to repair this product yourself,our company shall not
be liable for the injury or damage caused by any servicing without authorization.
TROUBLESHOOTING
TECHNICAL SPECIFICATION
19
NO.
Symptoms
Possible Causes
1
2
3
4
5
6