rotai RT8900 - Advice on Moving the Chair; Moving Procedure and Precautions; Connecting to Power

14
ADVICE ON MOVING THE CHAIR
• Always ensure the backrest is in the upright position.
• Always roll the chair on its casters when moving to the desired location.
• Always turn o the power switch and unplug the appliance from the electrical outlet before
moving.
• We suggest the chair be moved by two persons by pushing down on the backrest and lifting
up on the front side by grabbing the moving holder located at the front bottom of the armrest.
Roll the chair on its casters to the desired location (see sketch below or view an excellent video
demonstrating how to move the RT8900).
• Do not move the chair whilst in use.
• Never lift the chair by the footrest.
• The chair needs a minimum of 4 persons to carry it when fully assembled
CAUTION
• Connect this appliance to a 3-wire properly grounded outlet.
• Turn on the main power switch by the right-hand side of the
massage chair.
Connect to Power
• Ensure that there is no damage to the supply cord before
switching on the massage chair.
• Ensure that the main power switch on the chair is turned “o”
before connecting the chair to the power outlet.
CAUTION