15
GETTING STARTED
• Use the quick access button to recline the backrest to its lowest position. Raise and extend the
footrest to its top position, making sure there is enough clearance before commissioning.
• Return the backrest and footrest to its default position after use and not to forget to turn
o the power switch. (To quickly choose a massage program, please use the Quick Access
Buttons on the armrest of the chair).
• Ensure the footrest is properly assembled.
• If there is any part of the chair that is not in the default raised position, then turn
o the chair to allow it to restore.
Before Sitting In The Chair
• Do not attempt to sit on the chair whilst the footrest is raised,
• Do not put any excessive load on the footrest to avoid damage.
CAUTION
To Next Page
Loading...