Rotair Dustless Blasting D185T4F-DB User Manual

USER'S AND
MAINTENANCE
MANUAL
Date:
01/31/2020
Code
MAN D185T4F-DB
ENG
Air Compressor : D185T4F-DB
Revision
03
Copyright © 2014, ROTAIR S.P.A. - All rights reserved. This manual is intellectual property of ROTAIR S.P.A.
Its full or partial reproduction is forbidden under any form, on any support and by any means, without the
written authorization by ROTAIR S.P.A.
Page
23/59
6.4 Safety provisions concerning toolbox
The compressor can be equipped with a toolbox to put tools and/or objects inside the machine, under the cover.
1) Before putting any tool and/or object inside the toolbox, make sure you have allowed the machine
to cool down for a few minutes
2) Avoid storing containers with flammable or non-flammable liquid inside the toolbox
3) If you use the toolbox to store tools and other objects during the compressor's transport, make sure that
the cover is closed and locked
Picture 6.6-1 D185T4F-DB Toolbox
WARNING: The toolbox must be empty of tools and/or any other objects before
starting the engine to allow an unobstructed air flow to the engine radiator.
The max loading capacity of the toolbox is 100 lbs (45Kg).
The toolbox should only be used for storage and during transport. DO NOT use it
while the machine is working for operator’s safety reasons.
WARNING: The toolbox, while the machine is working, can reach temperatures
that could cause skin burns. Make sure the toolbox has properly cooled
before storing any objects in it.

Rotair Dustless Blasting D185T4F-DB Specifications

General

Brand	Rotair
Model	Dustless Blasting D185T4F-DB
Category	Air Compressor
Language	English