3
OWNER/EMPLOYER RESPONSIBILITIES
The Owner/Employer:
• Shall ensure that lift operators are qualified and that they are trained in the safe
use and operation of the lift using the manufacturer’s operating instructions;
ALI/SM07-1, ALI Lifting it Right safety manual; ALI/ST-05 ALI Safety Tips card;
ANSI/ALI ALOIM-2008, American National Standard for Automotive Lifts-Safety
Requirements for Operation, Inspection and Maintenance; ALI/WL Series, ALI
Uniform Warning Label Decals/Placards; and in the case of frame engaging lifts,
ALI/LP-GUIDE, Vehicle Lifting Points/Quick Reference Guide for Frame Engaging
Lifts.
• Shall establish procedures to periodically inspect the lift in accordance with
the lift manufacturer’s instructions or ANSI/ALI ALOIM-2008, American National
Standard for Automotive Lifts-Safety Requirements for Operation, Inspection and
Maintenance; and The Employer Shall ensure that lift inspectors are qualified
and that they are adequately trained in the inspection of the lift.
• Shall establish procedures to periodically maintain the lift in accordance with
the lift manufacturer’s instructions or ANSI/ALI ALOIM-2008, American National
Standard for Automotive Lifts-Safety Requirements for Operation, Inspection and
Maintenance; and The Employer Shall ensure that lift maintenance personnel
are qualified and that they are adequately trained in the maintenance of the lift.
• Shall maintain the periodic inspection and maintenance records recommended
by the manufacturer or ANSI/ALI ALOIM-2008, American National Standard
for Automotive Lifts-Safety Requirements for Operation, Inspection and
Maintenance.
• Shall display the lift manufacturer’s operating instructions; ALI/SM07-1,
ALI Lifting it Right safety manual; ALI/ST-05 ALI Safety Tips card; ANSI/
ALI ALOIM-2008, American National Standard for Automotive Lifts-Safety
Requirements for Operation, Inspection and Maintenance; and in the case
of frame engaging lifts, ALI/LP-GUIDE, Vehicle Lifting Points/Quick Reference
Guide for Frame Engaging Lifts; in a conspicuous location in the lift area
convenient to the operator.
• Shall provide necessary lockout/tagout means for energy sources per ANSI
Z244.1-2003 (R2008), Safety Requirements for the Lockout/Tagout of Energy
Sources, before beginning any lift repairs.
• Shall not modify the lift in any manner without the prior written consent of the
manufacturer.
CAUTION
Lift to be used
by trained operator
only.
©
?
?
?
SAFETY
INSTRUCTIONS
Proper maintenance
and inspection
is necessary
for safe operation.
c
Read operating
and safety manuals
before using lift.
©
SAFETY
INSTRUCTIONS
To Next Page
Loading...
Need help?
General
