Rotary SPOA10 Series - User Manual

SPOA10NB, SPOA10, SPO10, SPOA7
(500, 700, and 800 Series Lifts)
SPOA7 Capacity 7,000 lbs. (3,175 kg.)
SPOA10NB, SPOA10, SPO10 Capacity 10,000 lbs. (4,536 kg.)
Español Página 20
Le Français La page 40
I
N
S
T
A
L
L
A
T
I
O
N
I
N
S
T
R
U
C
T
I
O
N
S
© June 2019 by Vehicle Service Group. All rights reserved. CO10473
I
N
S
T
A
L
L
A
T
I
O
N
I
N
S
T
R
U
C
T
I
O
N
S
LP20314
IN20384
Rev. BE 6/11/2019
OPERATING CONDITIONS
Lift is not intended for outdoor use
and has an operating ambient temperature
range of
41°-104°F (5°-40°C)
IMPORTANT
Reference ANSI/ALI ALIS,
Safety Requirements for
Installation and Service of Automotive Lifts
before installing lift.

Rotary SPOA10 Series Specifications

General

Capacity	10, 000 lbs
Motor	2 HP
Power Source	Electric
Voltage	208-230V
Overall Width	132"

Summary

Lift Bay Layout and Dimensions

Column Installation and Setup

Concrete and Anchoring Procedures

Anchor Installation Reference Guide

Guide for anchor installation, including torque, concrete strength, and dimensions.

Drilling and Anchoring Steps

Steps for drilling holes and securing anchors with torque specifications.

Overhead Assembly and Power Unit Installation

Latch Cable System Installation

Electrical and Control Systems

Electrical Wiring and Connections

Guides for single and three-phase power unit wiring and electrical codes.

3Ø Control Box Installation

Steps for mounting and wiring the three-phase control box.

Arm and Restraint Installation

Arm Restraint Engagement and Operation

Final Checks and Adjustments

Pressure Test and Operational Verification