To Next PageTo Next Page
Need help?Do you have a question about the Rotary SPOA10NB Series and is the answer not in the manual?
General| Brand | Rotary |
|---|---|
| Model | SPOA10NB Series |
| Category | Lifting Systems |
| Language | English |
Important safety warnings and ambient temperature range for lift operation.
Minimum dimensions required for lift installation bays for specific models.
Minimum bay dimensions for seismic base plate installations.
Guidance on selecting lift location and determining necessary clearance.
Instructions for installing column extensions and overhead mounting brackets.
Procedures for positioning columns and ensuring proper base plate alignment.
Guide for concrete requirements and anchor installation for non-seismic lifts.
Detailed steps for drilling and securing anchors in concrete floors.
Instructions for attaching the overhead assembly to the mounting brackets.
Mounting the power unit and installing hydraulic hoses and fittings.
Specific hardware and configurations for overhead assembly for different models.
Routing and tensioning equalizing cables for lift balance.
Routing and securing the locking latch cable for safety engagement.
Details on latch cable sheaves, clamps, and handle installation.
Wiring instructions for single-phase power units and motor data.
Wiring data and pin layouts for three-phase power units.
Mounting and wiring the control box for three-phase lifts.
Procedures for filling hydraulic fluid and installing lift arms and restraints.
Instructions for attaching door bumpers to columns and carriage tubes.
Adjusting the latch cable for proper engagement and disengagement.
Performing pressure tests, cable tension checks, and overall lift function verification.
Positioning safety decals and securing wheel spotting dishes.
Instructions for returning the manual and contact information for parts and support.
