To Next PageTo Next Page
Need help?Do you have a question about the Rotel A10 and is the answer not in the manual?
General| Total Harmonic Distortion | <0.03% |
|---|---|
| Speaker Impedance | 4 ohms minimum |
| Damping Factor | 180 |
| Power Output | 40W per channel (8Ω) |
| Frequency Response | 10Hz - 40kHz (+1dB, -3dB) |
| Signal to Noise Ratio | 100dB |
| Dimensions | 430 x 72 x 342 mm |
| Weight | 5.9 kg |
| Input Sensitivity | 150mV |
| Input Impedance | 24k ohms |
Covers warnings about moisture, electrical shock, foreign objects, ventilation, and proximity to heat sources.
Details on power cord use, voltage, grounding, extension cords, and polarized plug safety.
Guidelines for cleaning, moving the unit, servicing, and safety during lightning storms.
Description of the front panel components, including power, volume, source selection, and inputs.
Details on rear panel inputs, outputs, speaker terminals, power input, and trigger output.
Covers unpacking, reading the manual, warranty, and initial connection steps.
Guidelines for optimal placement, heat dissipation, and ventilation requirements.
Advice on cable routing, power cord usage, and unplugging during extended periods.
Details on connecting various audio sources like Phono, Line Level, and Tape inputs.
Instructions for connecting speakers, including selector switch, wire selection, and polarity.
Explanation of how to use Volume, Balance, and Tone (Bass/Treble) controls.
Details on selecting audio sources and using the tape monitor function.
Information on connecting headphones and front panel media player input.
Explanation of the amplifier's protection circuits and power indicator behavior.
Steps to diagnose issues if the power indicator light does not turn on.
Guidance for troubleshooting and resolving the absence of audio output.
