To Next PageTo Next Page
Need help?Do you have a question about the Rotel A12 and is the answer not in the manual?
General| Damping factor | 220 |
|---|---|
| Amplifier class | A/B |
| Frequency range | 10 - 100000 Hz |
| Output impedance | 470 Ω |
| Audio output channels | - channels |
| Peak power per channel | - W |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Total Harmonic Distortion (THD) | 0.03 % |
| RMS power output per channel (8 Ohm) | 60 W |
| Speakers connectivity type | - |
| Product color | Black |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 230 W |
Weight and Dimensions| Depth | 345 mm |
|---|---|
| Width | 430 mm |
| Height | 93 mm |
| Weight | 8000 g |
Preamble to safety instructions detailing user responsibilities and warnings.
Essential steps before connecting or operating the amplifier to prevent damage.
Guidance on unit positioning for optimal performance and ventilation.
Best practices for connecting audio cables to prevent interference.
Information on using the supplied remote control for operations.
Connecting power and understanding control features.
Using 12V trigger outputs for automatic component control.
Understanding the amplifier's protection circuitry and indicators.
Connecting turntables and grounding to prevent hum.
Connecting CD players, tuners, and other analog audio sources.
Connecting digital sources via coaxial or optical cables.
Connecting speakers to the amplifier using binding posts.
Adjusting the audio output level using the front panel or remote.
Adjusting the left-to-right sound balance.
Bypassing bass and treble tone controls for pure sound.
Adjusting the brightness of the front panel display.
Adjusting the brightness of front panel LEDs.
Setting to enable or disable tone controls.
Adjusting the bass level.
Adjusting the treble level.
Adjusting the left/right balance.
Setting the front display brightness.
Setting the front panel LED brightness.
Sets the maximum volume level when the unit is turned on.
Configures the rear USB port power supply behavior.
Sets an automatic power-off timer for the unit.
Enables automatic power on when an audio signal is detected.
Configures a fixed volume level for specified inputs.
Steps to diagnose why the power indicator is not lit.
Guidance on replacing the internal power fuse.
Troubleshooting steps for when no audio output is present.
List of supported audio formats for various inputs.
Steps to resolve Bluetooth pairing issues.
