Need help?Do you have a question about the Rotel RB-1592 and is the answer not in the manual?
Avoid water, liquids, foreign objects, and ensure only qualified personnel perform servicing.
Proper power cord usage, outlet connection, grounding, and lightning storm precautions.
Guidelines for safe placement, clearance, and avoiding heat sources or blocked vents.
Instructions for stopping use, signs of malfunction, and protection indicator awareness.
Details on the front panel power switch and indicator light.
Description of input, output, speaker binding posts, and 12V trigger connections.
Explanation of the rear panel protection indicator light status.
Illustration showing how to connect pre-amplifier outputs to amplifier inputs (RCA/XLR).
Diagrams for single-wire and bi-wire speaker connections from the amplifier.
Procedure to turn off all system components before making or changing connections.
Advice to turn the volume control down before powering the amplifier on or off.
Rotel's origins, passion for music, and dedication to high-fidelity audio.
Rotel's design process, component selection, and environmental responsibility.
A welcome message and expectation of long-term enjoyment from the RB-1592.
Highlights of the RB-1592 power amplifier's capabilities and design.
Important steps before installation: read manual, save carton, fill registration card.
Instructions for optimal and safe placement, including clearance and cabinet ventilation.
Connecting power, operating the unit, and understanding protection and 12V trigger functions.
Connecting and using the 12V trigger for remote power control.
Details on RCA and XLR inputs and the input selector switch.
Guidance on speaker impedance, wire selection, polarity, and connection methods.
Diagnosing and resolving problems like no power, no sound, or protection indicator.
Detailed performance metrics including power output, distortion, frequency response, and dimensions.
Avoid water, liquids, foreign objects, and ensure only qualified personnel perform servicing.
Proper power cord usage, outlet connection, grounding, and lightning storm precautions.
Guidelines for safe placement, clearance, and avoiding heat sources or blocked vents.
Instructions for stopping use, signs of malfunction, and protection indicator awareness.
Details on the front panel power switch and indicator light.
Description of input, output, speaker binding posts, and 12V trigger connections.
Explanation of the rear panel protection indicator light status.
Illustration showing how to connect pre-amplifier outputs to amplifier inputs (RCA/XLR).
Diagrams for single-wire and bi-wire speaker connections from the amplifier.
Procedure to turn off all system components before making or changing connections.
Advice to turn the volume control down before powering the amplifier on or off.
Rotel's origins, passion for music, and dedication to high-fidelity audio.
Rotel's design process, component selection, and environmental responsibility.
A welcome message and expectation of long-term enjoyment from the RB-1592.
Highlights of the RB-1592 power amplifier's capabilities and design.
Important steps before installation: read manual, save carton, fill registration card.
Instructions for optimal and safe placement, including clearance and cabinet ventilation.
Connecting power, operating the unit, and understanding protection and 12V trigger functions.
Connecting and using the 12V trigger for remote power control.
Details on RCA and XLR inputs and the input selector switch.
Guidance on speaker impedance, wire selection, polarity, and connection methods.
Diagnosing and resolving problems like no power, no sound, or protection indicator.
Detailed performance metrics including power output, distortion, frequency response, and dimensions.
General| Number of Channels | 2 |
|---|---|
| Total Harmonic Distortion (THD) | < 0.03% |
| IMD (Intermodulation Distortion) | < 0.03% |
| Input Sensitivity | 1.5V |
| Input Impedance | 12kΩ |
To Next Page
