Need help?Do you have a question about the Rotel rx 950ax mk II and is the answer not in the manual?
General| Input sensitivity (MM) | 2.5mV |
|---|---|
| Input sensitivity (line) | 150mV |
| Signal to noise ratio (MM) | 80dB |
| Signal to noise ratio (line) | 100dB |
| Tuning range | FM: 87.5-108 MHz, AM: 522-1611 kHz |
| Frequency response | 10Hz to 100kHz |
| Total harmonic distortion | 0.03% |
| Speaker load impedance | 4-16 ohms |
Proper placement, ventilation, and temperature considerations for the unit.
Guide for connecting indoor and outdoor FM/AM antennas.
Instructions for connecting 4-8 ohm speakers, including A+B setup.
Overview of standby button, power indicator, and display functions.
Description of signal indicator, remote sensor, and station tuning.
Controls for memory stations, tuning, volume, and band selection.
Power output, distortion, sensitivity, and impedance details.
FM sensitivity, S/N ratio, distortion, selectivity, and response.
To Next Page