Need help?Do you have a question about the Rotel RSX-1057 and is the answer not in the manual?
Connections for analog audio signals to and from the RSX-1057. See Making Connections topic.
Five pairs of binding post connections for speakers. Includes setup for 6.1/7.1 systems.
Ten RCA analog audio outputs for sending signals to external amplifiers and powered subwoofers.
Provides digital connections for audio signals, including five digital inputs and two digital outputs.
Provides instructions for connecting CD players, DVD players, and tuners.
Connects digital output from tuners to OPTICAL IN or COAXIAL IN digital inputs.
Connects a standard RCA audio cable from PREOUT jacks labeled SUB to the subwoofer's power amp.
Overview of system operation via front panel and remote control, using On-Screen Displays (OSD).
Covers basic operating controls, power, standby, and remote operation.
Explains the function of the rear panel POWER switch and front panel STANDBY button.
How to select any of nine source inputs for listening, watching, or recording.
Covers speaker configuration, bass management, and audio setup for optimal performance.
Explains automatic detection and decoding of digital sources for surround modes.
Describes how to manually select surround modes not automatically detected or to override settings.
Explains manual surround mode options for Dolby Digital 2.0 discs.
Details how to calibrate speaker volume levels using test tones or an SPL meter.
Menu for configuring source inputs: LISTEN, VID INPUT, LABEL, INPUT, CINEMA EQ, DEFAULT MODE, GROUP DELAY.
Addresses issues like unit not turning on, no sound, no video, speaker problems, and control malfunctions.
General| Number of Channels | 7 |
|---|---|
| Input Sensitivity | 200 mV |
| Input Impedance | 47k Ohms |
| Speaker Impedance | 4 - 8 ohms |
| Type | AV Receiver |
| Frequency Response | 10Hz - 100kHz |
| Video Connections | Composite, S-Video, Component |
| Digital inputs | Coaxial, Optical |
To Next Page
