What causes differential pressure in my ROTORCOMP EVO2?
If your ROTORCOMP Compressor experiences differential pressure, it could be because the pressure in the separator cartridge is too high due to the cartridge being full or clogged. Replace the separator cartridge to resolve this.
What to check if the fan failed and combistat switches off due to high temperature in my ROTORCOMP EVO2?
If the combistat on your ROTORCOMP Compressor switches off due to excessively high temperature, it could be due to a fan failure. Check the fan.
Why does the combistat switch off due to high temperature in my ROTORCOMP Compressor?
If the combistat switches off on your ROTORCOMP Compressor due to excessively high temperature, it might be due to an oil shortage. Check the oil level in the oil reservoir and top up if necessary.
Why does my ROTORCOMP Compressor system not relieve pressure?
If your ROTORCOMP Compressor system does not relieve, the issue might be with the solenoid valve or electrical system. Check these components.
How to fix a faulty thermostat causing high temperature shutdown in my ROTORCOMP Compressor?
If the combistat switches off due to excessively high temperature in your ROTORCOMP Compressor, it might be due to a faulty thermostat. Replace the thermostat to resolve this.
Why is my ROTORCOMP EVO2 continually discharging with low feed?
If your ROTORCOMP Compressor is continually discharging and has a low feed quantity, the solenoid valve or relief valve might be defective. Consider replacing the solenoid valve or relief valve.
Why doesn't my ROTORCOMP EVO2 Compressor system discharge properly?
If your ROTORCOMP Compressor system does not discharge during continuous operation, or it does not switch off automatically during intermittent operation (i.e., the safety valve blows off), the upper switching point of the network pressure monitor might be set too high. Readjust the network pressure monitor.
What causes the combistat to switch off due to high temperature in my ROTORCOMP EVO2?
If the combistat on your ROTORCOMP Compressor switches off because of excessively high temperature, the oil filter might be soiled. Replace the oil filter cartridge.
Why is my ROTORCOMP EVO2 Compressor system difficult to start?
If your ROTORCOMP Compressor system is difficult to start, it might be because the screw compressor air end is flooded with oil. You should check it.
Why is there no or insufficient feed quantity from my ROTORCOMP EVO2?
If your ROTORCOMP Compressor experiences no or insufficient feed quantity, the intake filter might be soiled. Replace the filter insert to resolve this issue.
Covers general information, scope, and change service status of the manual.
Details manufacturer's information, purpose, delivery, and optional components.
Outlines warranty conditions, liability disclaimers, and nameplate identification.
Explains the meaning of warning, caution, and note symbols used for safety information.
Lists national and international regulations relevant to operating pressure vessels and safety.
Provides essential general safety instructions for installation, commissioning, operation, and maintenance.
Details specific symbols indicating hazards and their meanings.
Lists required personal safety equipment and guidelines for its use.
Provides a general overview and identification of key components for EVO compressor air ends.
Illustrates different models of screw compressor air ends with horizontal and vertical transmissions.
Details how the system is delivered and packed according to shipping methods.
Outlines procedures for checking and reporting transport damage to ensure claims are valid.
Provides instructions and warnings for safely moving unpacked screw compressor air ends.
Covers assembly, fastening methods, and three-point fastening for secure mounting.
Details requirements for connecting pipes to the compressor air ends, avoiding damage.
Lists safety precautions to be observed during installation and assembly of the system.
Provides guidance on installation location, alignment, and drive system connection.
Details proper installation and considerations for belt drives, including tensioning.
Covers direct drive installation, emphasizing alignment and use of centering flanges.
Specifies requirements for air inlet quality and filtration for optimal compressor operation.
Specifies requirements for air outlet connections to minimize pressure loss and ensure safety.
Provides information on oil cooling system design requirements and considerations for optimal performance.
Highlights accessibility requirements for service points during system installation for ease of maintenance.
Details essential checks and procedures required before initial system commissioning.
Explains how to correctly check the rotation direction of the compressor air end to prevent damage.
Outlines critical steps and precautions to be observed during the initial test run of the system.
Specifies measures required for recommissioning systems that have been shut down for extended periods.
Emphasizes safety rules and procedures for authorized personnel performing maintenance work.
Details the importance of oil level, how to check it, and potential hazards.
Covers procedures, intervals, draining, and refilling for oil changes.
Provides a template for recording maintenance activities performed on the system.
Offers reference values for maintenance tasks based on operating hours and time periods.
Specifies suitable oil types and manufacturers for screw compressor air ends.
Provides guidance on topping up oil, emphasizing brand and type consistency.
Outlines measures to prevent freezing and ensure operation at low room temperatures.
Warns about potential damage to plastic piping systems from compressor oil.
Covers pressure dew point, temperatures, condensate damage, and cold starts.
Discusses oil separation performance and the prohibition of multigrade oils.
Lists key technical specifications for various screw compressor air end models.
Provides maximum permissible tightening torques for different screw/bolt types.
Lists common faults, their possible causes, and remedies for system issues.
General| Brand | ROTORCOMP |
|---|---|
| Model | EVO2 |
| Category | Compressor |
| Language | English |
To Next Page
