© Rototilt Group AB 2018-04-27
ICS Direct Wheel
English
Declaration of conformity for the incorporation of a partly-completed machine.
In accordance with Machinery Directive 2006/42/EC. Appendix II B.
Rototilt Group Systems AB
Box 56
SE-922 21 Vindeln
SWEDEN
declare under our sole responsibility that the following product:
a) is manufactured in accordance with and meets all applicable provisions in EC Directive
2006/42/EC,
b) is manufactured in accordance with the following standards:
ISO 5010:2007 Earth-moving machinery—Rubber-tyred machines—Steering requirements,
EN 474-1:2006+A5:2018 Earth-moving machinery – Safety – General requirements and
EN 474-5:2006+A3:2013 Earth-moving machinery – Safety – Requirements for hydraulic
excavators.
The party-completed machine also meets the requirements in EC Directive 2014/30/EC in respect of
electromagnetic compatibility.
The partly-completed machine may not be put into operation before the completed machinery in which it is
to be incorporated is in accordance with the provisions in 2006/42/EC.
An avoidance maneuver test in accordance with 10.4 in ISO 5010:2007 must be carried out for the
alternate steering function. The test determines the authorized speed with the alternate steering active, to
a maximum of 20 km/h.
We conrm that the relevant technical documentation has been compiled in accordance with Appendix 7B.
The authorized individual to compile the technical documentation is:
Niklas Bjuhr
VP Engineering
Upon reasoned request from national authorities, we undertake to provide relevant information in respect
of the partly-completed machine. This provision is made by the requested information being sent in writ-
ing by post to the national authority within a reasonable timeframe following the request, unless otherwise
agreed.
Place and date: Vindeln, Sweden 2018-04-27
Name and signature of authorized person:
Anders Jonsson
CEO
To Next Page
Loading...
