Main Brush
1. Flip over the device. Press the buckle on the main brush cover to
take out the main brush.
2. Use the cleaning brush to remove dust & debris which may have
been stuck in the main brush cavity and main brush body.
3. Reinstall the main brush, then the main brush cover. Once the
brush cover has been securely installed, there will be a click
sound.
Note: It is recommended to replace the side brushes once
every 3 to 6 months to ensure optimal performance.
Side Brush
1. Flip over the device and pull out the side brushes vertically.
2. Reinstall the brushes after removing any trapped debris and
dirt.
3. Align the left and right brushes with the corresponding
markings ( L/R )on the bottom cover, and then press down to
install.
ROUTINE MAINTENANCE
12
To Next Page
Loading...