1. This device is only to be used with the power supply unit provided with it.
2. The adapter must be removed from the socket-outlet before cleaning or maintaining the device.
3. This device contains batteries that are only replaceable by skilled people.
4. The battery must be removed from the device before it is disposed of.
5. This device must be disconnected from the power supply when removing the battery.
6. The battery is to be disposed of safely.
7. WARNING: For the purposes of recharging the battery, only use the detachable power supply unit provided with this device.
Plug Type
Model Input
Output
USA NLD100240W1A4 AC- 100-240V 50/60Hz 0.6A DC- 24V1A
Battery and Charging
• Please do not use a battery, charging base or charger provided by any third parties.
• Please do not dismantle or refit the battery and charging base.
• Please keep the charging base away from heat sources (such as a heating plate).
• Please do not wipe or clean the charging base using a wet cloth or wet hand.
• Please do not improperly dispose of used batteries. Used batteries should be disposed of by a professional recycling agency.
• If the power line is damaged or broken, please stop using it immediately and replace it with an official Applied Science product.
• Please ensure the robot is turned off during transportation and the product should be transported in its original packaging.
• If the device is left unused for too long, it should be fully charged and then placed in a cool dry place. Charge the device at least every
3 months, to avoid damaging the batteries due to excessive discharge.
SAFETY INFORMATION
2
To Next Page
Loading...