III
29
out of the chair, because this will cause instability. Keep your arms on or inside the armrests and
your feet on the footplate at all times.
Note: Proper use, handling, and maintenance of your power wheelchair are critical to your
protection and to avoiding injury. Turn off the VR2/R-Net after you have finished using your pow-
er wheelchair and charge the battery.
Maintenance
Caring for the ROVI
®
X3 Power Wheelchair
There are some maintenance procedures that can be performed by the user, if he/she is able. These
procedures include equipment inspection, cleaning, and servicing of the power wheelchair. All
other maintenance and repair must be performed by a provider with a trained and certified techni-
cian.
· CAUTION Please follow the procedures and precautions in this manual care-
fully. Failure to adhere to these instructions can result in
equipment damage or personal injury.
· CAUTION During all work on the power wheelchair and electrical system,
make sure the circuit breaker is disconnected (disconnect at least
one battery connector).
Inspection
Inspect the power wheelchair on a regular basis, see the Maintenance Chart for periodic inspection
criteria. Regular inspection can spot problems before they can cause breakdown or other dangerous
issues.
To Next Page
Loading...