EasyManua.ls Logo

ROVI X3 - Storage Tips

ROVI X3
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
III
32
Upholstery:
Hand wash seat upholstery and armrests as needed with a soft, damp cloth and
mild detergent.
Never use an abrasive cleanser or solvent-based cleaners, such as turpentine.
Air dry only. Heat from a dryer may damage fabric.
Note: Washing the fabric may decrease the fire retardant properties.
Storage Tips
If you do not plan on using your power wheelchair for an extended period, it is recommended that
you fully charge the batteries and then disconnect the battery harness before storage.
Store your power wheelchair in a clean, dry area to prevent corrosion.
Before using your power wheelchair, make sure it is in proper working order.
Inspect and service all items in the “Maintenance Chart.
If you store the power wheelchair for more than 3 months, have it inspected by an
authorized ROVI
®
provider before use.
· CAUTION Never attempt to charge a frozen battery! A cold or frozen battery should
be warmed for several days prior to charging.
Lubrication
Most lubricated components on this power wheelchair are designed to be maintenance free and are
sealed. Therefore, lubrication IS NOT required for these components.
Batteries and Charging
Before using your power wheelchair for the first-time, you must charge the batteries fully (refer to
Battery Charging Instructions). Charging may take up to 12 hours. Charging the batteries complete-
ly prior to first time use will enhance battery efficiency and battery life.
Battery Type
The ROVI
®
X3 power wheelchair is designed to operate on two 12-volt, Group M34: (47.5 Ah - C/5
Rating) gel-cell, maintenance-free, batteries. The two 12-volt batteries are wired in series to create