What to do if my Rowenta Air Conditioner has little cooling effect?
If your Rowenta Air Conditioner seems to have little cooling effect, begin by closing any curtains to block direct sunlight. Then, close any open windows or doors, remove any heat sources from the room, and ensure that the air inlet and outlet are not blocked. Also, clean the filters. Finally, adjust the temperature selection.
How to troubleshoot a Rowenta Air Conditioner that does not function?
If your Rowenta Air Conditioner isn't working, first, ensure it's connected to a functioning outlet and switched on. If the display shows 'P1', empty the internal water tank. Also, ensure the room temperature isn't lower than the selected temperature; if it is, adjust the temperature setting.
General| Cooling capacity | 19000 BTU |
|---|---|
| Fan Speeds | 3 |
| Refrigerant | R410A |
| Type | Portable |
| Operating Modes | Cooling, Fan, Dehumidifier |
| Power Supply | 115V, 60Hz |
Read and follow all instructions carefully before using the appliance.
Key safety guidelines for operating the appliance to prevent fire, shock, or injury.
Details on handling and replacing batteries for the remote control.
Identification of the appliance's main parts and features.
Explanation of the control panel and remote control functions.
Instructions for installing the window kit for exhaust hose setup.
Instructions for installing the wall exhaust adapter.
How to power on/off, select modes, and set temperature/fan speed.
Using timer, sleep, swing, and backlight functions, plus drainage.
Instructions for cleaning the appliance's housing and internal filters.
Guidance on proper storage procedures for the air conditioner.
Solutions for common problems encountered with the appliance.
List of error codes, technical specifications, and performance data.
Information on the appliance's fuse and a detailed circuit diagram.
Specifies minimum room size and ventilation for safe installation of the appliance.
Requirements for technicians handling refrigerants and appliance servicing.
Ensuring the work area is safe, free from ignition sources and properly ventilated.
Procedures for working on sealed components, including leak detection.
Methods and procedures for detecting leaks in systems with flammable refrigerants.
Procedures for removing, recovering, and charging refrigerant into the system.
Best practices for safely recovering refrigerant into cylinders.
Ensuring equipment is correctly labeled after refrigerant removal.
Steps for safely decommissioning the appliance and recovering refrigerant.
To Next Page
