EasyManua.ls Logo

Rowenta Variable steam control iron - User Manual

Rowenta Variable steam control iron
10 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
2
3
5
7
8
9
10
11
12
A
6
4
Appliance description
A
1 Spray button
2 Burst of steam and
vertical steam button
3 Variable steam control with
Auto Steam and
Self Clean Function
4 Auto-off light
5 Thermostat light
6 Temperature control dial
7 Water filling inlet
8 Spray nozzle
9 Cord
10 Cord support
11 Water tank with maximum
water level indicator
12 Soleplate
NOT DX1700 BIS-1103898563 13/02/06 15:39 Page 1

Table of Contents

Questions and Answers

  • B
    brittney35Jul 30, 2025
    Why is my Rowenta Variable steam control leaking?
    • S
      Sarah AlvaradoJul 30, 2025
      Your Rowenta Iron might be leaking due to several reasons: * You may be overusing the burst button. Try allowing more time between each burst. * You might be using distilled or softened water. Switch to spring water or mix tap water with distilled water. * The tank may be overfilled. Do not fill past the max line on the tank, and ensure the filling inlet cover is closed properly (depending on your model).
  • A
    ashleytaylorAug 3, 2025
    What to do if my Rowenta Variable steam control does not heat up?
    • A
      Amber BartlettAug 3, 2025
      If your Rowenta Iron is not heating, consider the following: * Ensure the iron is correctly plugged in. * Increase the temperature setting. * If your model has an auto-off feature, move or gently shake the iron to reactivate it.
  • P
    Pamela MitchellAug 8, 2025
    Why is my Rowenta Variable steam control Iron emitting a brown or white substance?
    • A
      allisonmayAug 8, 2025
      If your Rowenta Iron is emitting a brown or white substance, it could be due to: * The water needing to be changed because of hardness or organic matter. Switch to spring water, or mix tap water with distilled water. * The garment not being rinsed sufficiently. Ensure garments are thoroughly rinsed to remove any detergent deposits or chemicals, especially on new clothes.
  • K
    Kelly DavisAug 14, 2025
    What to do if my Rowenta Variable steam control Iron is not producing enough steam?
    • D
      Dawn BurkeAug 14, 2025
      If your Rowenta Iron isn't producing enough steam: * Ensure that the water tank is adequately filled. * Make sure that the iron is set to a steam setting. * If your model has an anti-drip function, wait for the soleplate to reach the correct temperature.
  • K
    Kenneth FoleyAug 19, 2025
    What to do if the auto-off light is flashing on my Rowenta Variable steam control?
    • S
      stephaniegentrySep 12, 2025
      If the auto-off light is flashing on your Rowenta Iron, it means the auto-off feature has engaged. Move or gently shake the iron to reactivate it.
  • C
    Cynthia JonesAug 25, 2025
    Why is there build up on the soleplate of my Rowenta Variable steam control?
    • J
      joneswilliamAug 25, 2025
      Build-up on the soleplate of your Rowenta Iron can be caused by: * Starch use. Spray the reverse side of the fabric and allow the starch to penetrate. * Burnt material or ironing at too high a temperature. Be sure to set the temperature according to the fabric being ironed.

Summary

Appliance Description

Soleplate

The heated metal surface that contacts the fabric.

Important Safety Instructions

Special Instructions

3 Way Auto-Off Feature

Auto-Off Activation and Reset

Iron turns off automatically if stationary for 30s (flat) or 8min (vertical).

Filling with Water

Water Filling Procedure

Ensure iron is unplugged, steam control left, tilt iron, fill to max mark.

Water Recommendations

Tap Water Usage

Use regular tap water; mix with distilled if water is hard.

Prohibited Water Additives

Do not use battery water, starch, perfume, or descaling liquids.

Selecting the Temperature

Steam Ironing

Steam Ironing Safety

Never iron worn clothes. Fill and heat iron before first use.

Burst of Steam Function

Vertical Steam Function

Variable Steam Control

Auto Steam Function

Anti-Drip System

Anti-Calc System

Self Clean Function

Self Clean Warning

Do not use descaling agents; they can damage the steam chamber.

Self Clean Procedure

Flush mineral deposits by filling, heating, unplugging, and using steam lever.

Self Clean Safety Warning

Hot water and steam ejected; take precautions and hold iron away.

After Ironing

Post-Ironing Steps

Set dial to min, slide lever to no steam, unplug, and empty water.

Cleaning and Maintenance

Soleplate Cleaning

Wipe clean when cold. Use a soleplate kit for build-up.

Troubleshooting Guide

Iron Not Heating

Check plug, temperature setting, or auto-off engagement.

Not Enough Steam

Check water level, steam setting, or anti-drip function.

Brown or White Substance Emission

Check water quality, rinse garments, or avoid burst overuse.

Iron Leaking

Check water type (avoid pure distilled/softened), overfilling, or inlet cover.

Auto-Off Light Flashing

Auto-off has engaged; move or shake iron to reactivate.

Spray Function Not Working

Rowenta Variable steam control iron Specifications

General IconGeneral
BrandRowenta
ModelVariable steam control iron
CategoryIron
LanguageEnglish

Related product manuals