71
Royal Eneld Meteor
MINOR MAINTENANCE TIPS
Remove the spark plug cap from the spark plug.
Remove spark plug using the plug spanner and
tommy bar.
Clean the insulator tip and electrodes of the plug
carefully.
Check and set the electrode gap between 0.70 to
0.80 mm.
Ret the spark plug on the cylinder head and ret
the spark plug cap on the spark plug.
Ensure ignition & kill switch are in off condition
before accessing the spark plug.
Before opening the spark plug blow away the dust in
surrounding area to prevent it falling inside cylinder
head.
Ensure spark plug is being replaced with
recommended specication only.
SPARK PLUG
CLEANING AND ADJUSTING PLUG GAP
CAUTION
To Next Page
Loading...
Need help?
General
