87
Royal Eneld Meteor
WASHING PROCEDURE
Ensure, the motorcycle is thoroughly dry by wiping
with a clean soft lint free absorbent cloth or chamois
leather.
Remove all adhesive tapes.
Lubricate control cables, pivots for footrest, side
stand, center stand, brake and gear shifter linkages,
drive chain etc. with lube oil.
Polish the painted and plated surfaces using
recommended automobile polishing wax.
Start the engine and allow to run at an idling speed
for a few min to warm up engine.
Drive the motorcycle slowly, apply both the brakes
intermittently to dry up the water in brake pads.
Please clean / wipe out water spils completely inside
the RH side panel before keeping tool kit, rst aid kit
and other relevant documents inside the right side
panel.
AFTER WASHING
To Next Page
Loading...
Need help?
General
