Need help?Do you have a question about the Royal Enfield Classic 350 BS IV and is the answer not in the manual?
General| Displacement | 346 cc |
|---|---|
| Power | 19.8 bhp @ 5250 rpm |
| Torque | 28 Nm @ 4000 rpm |
| Fuel System | Electronic Fuel Injection |
| Rear Suspension | Twin Shock Absorbers |
| Seat Height | 800 mm |
| Weight | 192 kg |
| Ignition | Digital electronic ignition |
| Ground Clearance | 135 mm |
| Engine Type | Single Cylinder, 4 Stroke, Air Cooled |
| Transmission | 5 Speed |
| Front Brake | Disc |
| Rear Brake | Drum |
| Front Suspension | Telescopic |
| Wheelbase | 1390 mm |
| Fuel Tank Capacity | 13.5 L |
Details about the engine and its performance metrics.
Information on the motorcycle's ignition system components.
Details regarding the gearbox, clutch, and gear ratios.
Specifications related to the frame, suspension, and brakes.
Information on the electrical system components and their ratings.
Physical dimensions and measurements of the motorcycle.
Information on the motorcycle's kerb weight and payload.
Identification of switches and levers on the handlebar.
Identification of main components on the motorcycle body.
Identification of parts located on the left side of the motorcycle.
Instructions for operating the steering lock mechanism.
How to open and securely close the fuel tank cap.
Operation procedures for the ignition switch.
Guidance on operating the fuel tank and associated warnings.
Operation of the engine stop switch for safety.
Procedure for using the electric start switch.
Operation of the headlight dimmer switch for beam adjustment.
How to operate the motorcycle's horn.
Operation of the headlight flash function.
How to operate the turn signal indicators.
Procedure for using the choke lever.
Operation of the fuel tap for fuel supply control.
Recommended riding apparel for safety and visibility.
Guidance on maintaining correct riding posture.
Techniques for effective and safe braking.
Instructions for starting the engine using the kick start.
Instructions for starting the engine using the electric starter.
Procedure for parking the motorcycle on its center stand.
Procedure for parking the motorcycle on its side stand.
Maintenance for engine oil, filter, spark plugs, carburetor, and related parts.
Adjustment and maintenance of clutch, accelerator, and TPS cables.
Maintenance of air filter, fuel filter, and fuel pipes.
Care for battery terminals and emission control hoses.
Lubrication of stands, pivots, and swing arm components.
Inspection of tyres, brake pads, fluid, and hoses.
Maintenance of rubber hoses and battery electrolyte level.
Step-by-step guide for removing the front wheel.
Procedure for correctly reassembling the front wheel.
Step-by-step guide for removing the rear wheel.
Procedure for correctly reassembling the rear wheel.
Lubrication of control cables, levers, and stand pivots.
Cleaning, lubrication, tensioning, and adjustment of the drive chain.
Checking engine oil and brake fluid levels.
Checking tyres for wear and wheels for damage.
Cleaning and adjusting the spark plug gap.
Maintenance and replacement of battery, bulbs, and fuses.
Inspection of brake pads for wear.
Safety measures to follow when washing the motorcycle.
Steps to perform after washing the motorcycle.
Information on service coupons and their use.
Forms and activities for tracking free services.
Forms and activities for tracking paid services.
Log for recording details of paid maintenance.
To Next Page