Need help?Do you have a question about the Royal Enfield 350 BULLET 1960 and is the answer not in the manual?
General| Displacement | 346 cc |
|---|---|
| Bore x Stroke | 70 mm x 90 mm |
| Wheelbase | 1370 mm |
| Fuel Capacity | 14 liters |
| Engine Type | Single cylinder, 4-stroke |
| Torque | 28 Nm |
| Transmission | 4-speed |
| Fuel System | Carburetor |
| Brakes | Drum |
| Front Brake | 153 mm drum |
| Rear Brake | 153 mm drum |
| Front Suspension | Telescopic fork |
| Rear Suspension | Swingarm with shock absorbers |
| Seat Height | 800 mm |
| Weight | 180 kg |
Steps for setting the engine's valve timing.
How to adjust valve tappet clearances.
Setting the ignition timing for the magneto/contact breaker.
Procedure for removing the cylinder head assembly.
Steps to remove the engine from the motorcycle frame.
Procedure for dismantling the engine's crankcase halves.
Procedures for dismantling and assembling the flywheel.
Steps to dismantle the motorcycle gearbox.
Guide to tuning the carburettor for optimal performance.
To Next Page